psymgnt 10 Report post Posted February 22, 2014 (edited) Hey guys how's it going!! I just joined because I'm about to take on a huge project and I'm probably gonna need help and ill probably answer some of your questions. So Im 18 years old and i know thats pretty young but i know my way around a car, that being having grown up with a family with about 18 old hotrods and classics. So I have a 1970 mustang fastback with a 351W 4-speed. I recently was just given a 1999 mustang with a fully custom 4.6 Saleen supercharger engine and custom suspension and I've decided I'm going to do a swap and put the new in the old. I know its a ton of work!! But I'm pretty excited for when its gonna be done. These are just a couple pictures from what it looked like before paint it got sent to paint about 2 years ago when we just drove it around to school. Sucks that i spent all that time putting it together, not knowing that I'm just gonna tear it all apart and its probably gonna have to be painted again. Ill post pictures for updates and such. Edited March 4, 2014 by psymgnt Quote Share this post Link to post Share on other sites
psymgnt 10 Report post Posted February 22, 2014 This is what the car looks like today. Ill post more pictures of the svt cobra in a while once i start the work Quote Share this post Link to post Share on other sites
rwcstang 202 Report post Posted February 22, 2014 nicely done! do you have any engine/drivetrain shots worth sharing? Quote Share this post Link to post Share on other sites
Angel 24 Report post Posted February 23, 2014 I'll definitely be following this thread as I am doing the same swap to my 69. If only I had time to actually work on it... Quote Share this post Link to post Share on other sites
rd49221 14 Report post Posted February 23, 2014 Welcome! Looking forward to seeing your progress Quote Share this post Link to post Share on other sites
jwscarab 20 Report post Posted March 4, 2014 Welcome and enjoy your rebuild! Lots of people here will help you where you need it! Quote Share this post Link to post Share on other sites
psymgnt 10 Report post Posted March 4, 2014 Hey guys so here's a quick update. I've been taking apart my fastback this week and will post pictures later once the old engine is out. So I've been doing a ton of research and it seems the 4.6 will fit fine in my engine bay. But I was wondering if anyone knew if the suspension of my 1999 mustang would fit the 1970 mustang? Quote Share this post Link to post Share on other sites
waketek516 10 Report post Posted March 4, 2014 Hey guys so here's a quick update. I've been taking apart my fastback this week and will post pictures later once the old engine is out. So I've been doing a ton of research and it seems the 4.6 will fit fine in my engine bay. But I was wondering if anyone knew if the suspension of my 1999 mustang would fit the 1970 mustang? If this is a Cobra 4V motor - it will not fit without modifying your shock towers. (I'm doing the same 4.6 4V motor in mine). I'll be using the Rod and custom complete MII suspension for it. 4.6 4V vs. 302/351 SBF I don't see how you would ever get the 99' Mustang suspension into the '70. The dimensions are pretty different, and there are far better aftermarket solutions than trying to make that work. Quote Share this post Link to post Share on other sites
jwscarab 20 Report post Posted March 4, 2014 I don't see how you would ever get the 99' Mustang suspension into the '70. The dimensions are pretty different, and there are far better aftermarket solutions than trying to make that work. 1+ on that! Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted March 4, 2014 Tape up the edges of the body panels and take them off to be stored seperate. That way you can try to avoid a repaint. Bob Quote Share this post Link to post Share on other sites