kenyu73 10 Report post Posted October 27, 2011 I've read through some project posts and I've or saw mention of mods to the front and/or rear suspension. I guess to raise or lower the car. Anyhow, I'm looking for a good level and "tough" look. I think I saw where people moved the front strut tower (down?)? I'm assuming to reduce the clearance in the front wheel-housings. Any suggestions on what the common practice is and maybe some links to where the steps are detailed? What are the pros/cons? See my project thread for details of my car. Thanks! Quote Share this post Link to post Share on other sites
LoneWolf2U 136 Report post Posted October 27, 2011 After looking thru your posts in the project, Do a search for the Arning drop. It moves the upper A arm down for better handling. As far as stance goes, you will need to get it togeather and sitting on the ground to see what changes need to be made to get that angled look your after. Here is mine with the Arning drop and basicly stock suspension. Quote Share this post Link to post Share on other sites
kenyu73 10 Report post Posted October 27, 2011 Is the UCA "shelby trick" the same thing? http://www.1969stang.com/mustang/forum/showpost.php?p=59243&postcount=16 Quote Share this post Link to post Share on other sites
Flanders 46 Report post Posted October 27, 2011 yep! Same trick, different name. Quote Share this post Link to post Share on other sites
