408-stroker-stang 10 Report post Posted January 20, 2010 can anyone tell me how i need to measure for a cowl hood? i am not sure if i need a 2" or 4". because of my heavy duty motor mounts and my msd electronic ignition my shaker raised up about 3" and the whole air cleaner sticks through the hood lol. So my plan is to get a cowl hood and then cut a hole in the top of it for the shaker to stick through. Quote Share this post Link to post Share on other sites
SlimeGold 69 15 Report post Posted January 23, 2010 (edited) Scince you have a flat hood in place on the car, just measure from the hood to a strait edge laid on top of the shaker scoop and subtract how much you want the scoop sticking thru. From the pic I don't think a 2" hood will work, so if a 2" and 4" is all that's available, you may end up working with a 4" cowl and adjusting the shaker height some way. But measure to make sure. Do you have a thick carb spacer on it and what kind of intake are you using? Edited January 23, 2010 by SlimeGold 69 Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted January 24, 2010 out of curiosity, what intake are you using? Quote Share this post Link to post Share on other sites