408-stroker-stang

I have a 69 coupe with a 393 stroker and a c4 with about 3,000 miles on the rebuild. It also has 18" foose ledgend wheel with about 200 miles on them. msd6al ignition and electric fans on radiator. I don't wan to sell but I am moving and I won't have room for it. asking 10,900.00 email me at jtwshed@gmail.com and I will send alot of pics. I am located about 80 miles east of dallas tx. thanks for looking.

thanks for the info it is a big help.

Ok here is the deal i found a local guy that can get me 18" foose wheels and for the front they say i need 18 x 8 with 4.25 back spacing and a 235-40-18 and for the back i need 18" x 9" with 5.25 back spacing with 245-40-18. Does this sound right? I am open for suggestions though! thanks

how different is the ride?

I am thinking about putting some 18" foose ledgend wheels on my 69 coupe. I was wondering if any one has 18" wheels on their 69 and does it make it ride any different? Also I am thinking about trying to put a 10" tire on a 9" wheel in the rear and wondering if anyone knows the back spacing that would work off hand? thanks

thanks for all of the info. Where is a good/economical place to buy wheels and tires? thanks

Does any one know if it is possible to get a 10" rear wheel under the rear fenders and not stick out like mine do in my pics? ps. I would like to do it without messing with the rear axel. thanks

I am getting ready to rebuild the window guides in my door, as of now if you want you can just pull the windows out of the top of the door. So i was wondering if there was something at the local auto parts store i can glue the windows back into the guides with and the most important question of all how do i locate where the window starts on the guide so it is lined up in the right place? thanks

When wiring a altenator my painless wiring kit it only shows me me to use a ground wire, wire at the bat terminal, and wire on the fld terminal. does not show to put anything on the stator terminal but when i have the car running we only have 12 volt testing at the battery not 14 like we should. Any info would be appreciated. thanks

Thanks for the info I will see about doing the vacuum test

Ok here is my deal i have a msd ignition system on my car and after i drive it a little while the car loses some power and acts like it is running on about 4 cylinders or it also did the same thing after i drove it for about 10 minutes a buddy of mine got in with me and i was gassing on it showing off and after i went through the gears it started the same thing again I babied it to where i was going and let it sit while i ate lunch, went out and it cranked fine so i didn't get on it or anything just drove it normal, however when i started going up a pretty good hill i gave it a little more gas and it started acting like it was trying to cut out on me when i let off of the gas it went back to acting right. I am pretty sure i have good wiring to the msd box and from it I just installed a painless wiring kit. I am thinking i may have to get a high output altenator but not sure what do yall think?

Ok here is my deal i have a msd ignition system on my car and after i drive it a little while the car loses some power and acts like it is running on about 4 cylinders or it also did the same thing after i drove it for about 10 minutes a buddy of mine got in with me and i was gassing on it showing off and after i went through the gears it started the same thing again I babied it to where i was going and let it sit while i ate lunch, went out and it cranked fine so i didn't get on it or anything just drove it normal, however when i started going up a pretty good hill i gave it a little more gas and it started acting like it was trying to cut out on me when i let off of the gas it went back to acting right. I am pretty sure i have good wiring to the msd box and from it I just installed a painless wiring kit. I am thinking i may have to get a high output altenator but not sure what do yall think?

Does anyone know where the wire from the dome light runs to? that way i at least know where about to start looking for the wires to it without pulling my head liner down. thanks

Does anyone know where the wire from the dome light runs to? that way i at least know where about to start looking for the wires to it without pulling my head liner down. thanks

here are the pics showing the 4 wires.