bswor 76 Report post Posted January 15, 2009 (edited) Particularly 05+ bullits? Or just 18" bullits in general? Or even 17" bullitts? Edited January 15, 2009 by bswor Quote Share this post Link to post Share on other sites
simplyj 26 Report post Posted January 15, 2009 05+ bullitt rims have too high of an offset. stick to the earlier bullitt rims or replicas. Quote Share this post Link to post Share on other sites
69MONSTER 10 Report post Posted January 15, 2009 i have 18 in on my 69 fastback wheel vintiques billet magnum 500 http://www.cardomain.com/ride/2203910 BILLET MAGNUM 500 Quote Share this post Link to post Share on other sites
ForceFed70 14 Report post Posted January 16, 2009 I run 18x9" bullit replica's 5.95" backspacing is too much, you'll need spacers/adapters in the front (I chose to narrow the wheels 1"). In the rear you might be able to get away without a spacer if you use narrow tires. I found that a 1/2" spacer (longer wheel studs) works great. Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted January 18, 2009 I am running 18X10 out back and 17X8 up front. the 18X9 was a bit too big up front so I went down in size. They are for the 94-04 years and I am running a 1 in spacer on the front. Quote Share this post Link to post Share on other sites
bswor 76 Report post Posted January 18, 2009 Are you running the spacer because they were hitting the control arm? Quote Share this post Link to post Share on other sites
GreeneMachines 10 Report post Posted January 18, 2009 What suspension setup/ tire sizes are you running? Thanks Quote Share this post Link to post Share on other sites
SM69Mach 68 Report post Posted January 18, 2009 Yes. I had the 18X9 but it was too wide when I lowered the car so I went down to the 17X8 up front, and now there is plenty of room from the control arm. I did the suspension kit from Laurel mountain with 1 in drop coil, which I think it dropped a little more with the big block. Mid eye rear springs with 2 in lowering blocks. I am running 245/45 up from and 305/35 out back. Quote Share this post Link to post Share on other sites