Ridge Runner 1,113 Report post Posted March 18 Pinned the rollers ,clamped it in a vice ad tried it out . Dented a piece of an old mustang hood and took it to the roller ,there is a trick to keeping it where you want it but it pushed the dent right out. I still have to bolt the roller pins in and i cant wait to try the real thing! I changed the lower roller to a more flat roller 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Mach1 Driver 560 Report post Posted April 1 like Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted April 1 It looks like i need both rollers to be flat rollers ,what you are wanting to do is flatten the dented area and not stretch it ,i will chuck up my next flatest roller in the lathe and flatten it out . I need to see if i can buy the harbor freight rollers seperatly then i could make a few custom rollers Quote Share this post Link to post Share on other sites
