rr03cobra 3 Report post Posted June 12, 2023 I’m just finishing up my vintage air installation and just want to verify some connections. Heater core outlet (top) to vintage air valve to water pump. Manifold outlet to heater core inlet (bottom). I included a picture of a bracket I made to mount the vintage air valve to. Any issues with running the hoses this way?Thanks for the help…Rich Quote Share this post Link to post Share on other sites
70Boss351 5 Report post Posted June 12, 2023 I'm finishing up the install of a Vintage Air system on my '70 351W and, assuming that I'm understanding the VA instructions, the lower heater outlet goes to the water pump and the upper inlet with the valve goes to the manifold. 1 Grabber70Mach reacted to this Quote Share this post Link to post Share on other sites
70Boss351 5 Report post Posted June 12, 2023 By the way, Vintage Air is pretty good about answering any questions if you email or call. Quote Share this post Link to post Share on other sites
rr03cobra 3 Report post Posted June 13, 2023 Thank you. I don’t know how I missed that in the directions Quote Share this post Link to post Share on other sites