Her69fastback
-
Content Count
189 -
Joined
-
Last visited
Posts posted by Her69fastback
-
-
Is there different starters for a 302? The flywheel is 164 tooth. It starts but makes a grinding noise. Once it’s running there’s no noise. It a c5 transmission
-
If it has drum brakes . Take the drum put it on backwards. Put some lug nuts on & use the drum as a slide hammer
-
I’m going to put a Borgeson power steering on the stang. It has a 302 in it. The belt will go around the water pump & crank pulleys. What size belt will I need? If anyone has a part # that would be great.
-
The cars my wife’s. So taking thing off won’t work. I’m going to go with the toggle switch. Then the car won’t have firer to start.
-
Thanks for all the great ideas. They all will work great to keep a honest man honest.
-
I’m looking for something that can be hidden. That looks kind of big
-
Thanks I’ll go this weekend & get me a toggle switch.
-
Thanks for all the help. Sorry for the late reply. Been getting some overtime at work. I was looking at using ether a 30amp or a 50amp toggling switch what would you recommend? Is there a good brand of toggle switch’s you might recommend?
-
-
It’s my wife’s car . She wants to drive it to get nails & hair done to show it off.
-
I’m wanting to put a kill switch with a key on the stang to make it harder to steal. I have looked it up & not finding a lot with a key. I want to stay away from a toggle switch if I can. The car has the mechanical fuel pump on it. I don’t want to put a electric fuel pump on it. Had a car in high school that had a electric fuel pump on it on a toggle switch. Didn’t turn it on & car ran for about two blocks before it died. What’s everyone using
-
If you have a automotive supply store around you one that sales car paint go to them . They should have everything you need. Most body shops get there supplies from a store like that
-
I put a Holley & edelbrock intake on the wife’s 69. I had to madify the bracket because of the vacuum hose coming out the back of the card. Cut it & put a small peice of a tube cut in half in it
-
If I’m not mistaken AN fittings take a 37 degree flare . That maybe why it’s not sealing
-
I don’t know about the headers. But get the Saginaw pump. I tried using the ford pump & it doesn’t work as well. Going to order the Saginaw pump
-
I figured out the more grounds you have the better.
-
Why didn’t you like the auto meter gauges RPM.
-
What gauges is everyone using? I’ve been all over the web. There are loads of them out there. Just wanting to know what working the best. I haven’t decided if I want to go with a stock look or go with the 6 gauges look.
-
I’m going to change it out when I put new gauges in it. Thanks again for all the help
-
Thanks again for all the help.
-
I don’t know exactly what the temp was or is. The car has the factory gauges. So the gauge was setting in the middle of the gauge & never moved from there when it got up to temp. I took the radiator cap off & waited the the thermostat opened to see where the gauge was setting at. It stayed right there. The timing was around 12 I set it to 10. The fan was one I had. I put one that pulls 3000 cfm. I don’t know the cfm of the old fan. Both are 16inch fans. It’s from American volts
-
I think I mite have it fixed. I put a new electric fan that pulls 3000 cfm. I also adjusted the air fuel mixture. Set the timing at 10. Let it run in the garage for about 15 mins & the headers never got red & it never dieseled your ran on. Should I change the thermostat to a 180 degree? I’m wanting to replace the gauges to ones that will fit in the stock cluster any suggestions. Thanks again for all the help everyone gave me. Couldn’t have done it without all your guys help. Going to take it out for a drive next weekend.
-
Yes it is was. Have to have idle up so it will stay running in gear. The backfiring is coming out the exhaust
-
Starter noise
in 1969-70 Technical Forum
Posted · Report reply
Thanks