Her69fastback

Do you have a part # by chance?

Have you had a chance to figure how much you need to upgrade & keep the site up? This is my favorite site for information

I’ve been looking at Bilstein shocks. The suspension is stuck on the car. Just looking for better shocks. The shocks on the car are ok just looking for better ones.

There’s a lot of kits out there. Is there one better than the other one? Thanks for the help.

Thanks

Who’s making the best stater solenoid? I see rock auto had a motorcraft one.

It’s a new block. Has never been assembled

I found a speedmaster 351w block stroked to 427. Is speedmaster blocks any good? It’s a new block only.

I’m going to replace the brakes on the 69. The car has manual brakes. This is my wife’s car. She doesn’t like driving it because of the brakes. I have talked to wilwood they said go with 7/8 bore master cylinder. Or should I just do power brake booster? Does anyone’s wife drive a car with a 7/8 bore master cylinder and think it stops great or would rather have power brakes?

Dose anyone know a aftermarket tilt column that will work with a Borgeson power steering set up? Ididit said they don’t make one for the 69. I called & talked to them. Flaming river said they can make one if I get all the measurement

I’ll check that. Never thought of that. thanks for the help

I ground down the paint behind the solenoid & bolted it using nut & bolt. Should I run a ground wire to the - side of the battery? Thanks for the help

Thank you

I put a new neutral safety switch when I put in the transmission. I have tried moving the shifter. I even put it in gear & in neutral. With no change. I can get out & put it across the solenoid & it will start ever time. It doesn’t happen all the time. That’s what’s driving me crazy. thanks for the help

I replaced the starter, starter solenoid & the ignition switch. You turn the key & you don’t get anything. Then other times it will start. This car used to be 3speed car. I put a automatic in it . I left the stock pedals in the car. Is there a switch I need to take out or something else I’m missing? Thanks for the help

Thanks for all the help

Who makes the best ignition switch for a 69 fastback? Need to replace the old one.

Thanks for the help

The engine compartment is painted. Can I run a ground to the starter solenoid?

Looking to replace the ignition switch in the 69. Doesn’t want to start sometimes. Starter in new & starter solenoid is new. You have to turn the key a few times then it starts. What a good ignition switch?

If your drag racing it does. Street car no

Thanks for all the help

To all the wiring gurus. I have everything wired & to car runs. I’m trying to figure out the double fan wiring. I have 2 relays on the way. I have 2 electric fans. The Holley snipe will control the fans. What’s confusing me is they say the Light blue & light green wires are output connect to relay ground trigger. I’m a dummy when it comes to wiring. I have searched the wed & it’s more confusing. I found this pic & I think this is how I need to do it. I want someone that’s knows a lot more then me to look at it.

I was told by the guy that rebuilt my transmission. That the c4& c5 look a lot alike. So make sure if you have a C5 rebuilt they know it’s a C5 not a c4. If they us C4 parts it will burn up

I put a C5 in the wife’s 69 bolted right up. I had to get a 164 tooth flex plate.