50dan

Clutch Disc, Aluminum/KEVLAR®, 1 1/16 in.- 10-Spline, 11 in. Disc, Ford, Mustang, Cougar, Torino, Maverick Brand new never used. Will work with SBF and Toploader. http://s247533021.onlinehome.us/catalog/product_info.php?cPath=81_93_106&products_id=735&osCsid=75865ac010f5789dfd3c9fc88cd76a69 The Pressure Plate is new in the box part #360850 and the TO bearing is #16031. http://www.jegs.com/i/McLeod/673/360850/10002/-1 http://www.jegs.com/i/McLeod/673/16031/10002/-1 Asking $350 for all or offer.

Look like this

Brand new Demon 1402010 carb still in the box never used. This is a $500 plus tx and shipping from Summit Racing. Asking $450 for it.

The actual body sheetmetal, not the pot metal extensions. Both sides.

Thanks for the info!

Looking for the taillight panel extensions that connect panel to the quarter. Also looking for trunk rail corners. Anyone have NOS or good parts you can cut off a car? Parts are for a Sportsroof not a coupe. Thanks

The mount with the smaller slots is from my 69 Mustang with a C4 auto. The other with longer slots has 250 390 x and then an R on the rear I assume. The larger one also will set the trans about 1/2" lower. Any know the application for this one?

Thank you for the replies everyone. Looks like I'll go with black for a base.

My car has original dark red standard interior. My question is...Can I dye a black dash pad to the correct color or should I buy the white for better results??? Does it matter? Anyone done this? Thanks!

Sale pending locally.

Here are pics

Is there a way to tell?

I've had this floating around for a while and don't need it. It is for a non A/C car. Brand new never used. Asking $300.

How much?

Get a damn good trans rated for the right power. The AOD's are very weak.

Its been sold.

Your point on the $35??? Not sure what you mean. HV isn't needed in most applications. The HV pumps are only needed for an older worn motor. If you have a fresh or nearly new motor the HV pumps don't help unless the clearences are loose. So to spend $60 vs $35 on an oil pump your wasting $25.

std pump. I'll do $50 shipped for the pump and gasket together. The gasket is for all 69-97 blocks. The oil pan must have a smooth surface unlike some of the Canton pans that have the dimples in the rail. I guess the cork style seal the dimples better. This is an all rubber 1 pc seal with a steel core. Very nice.

Sold

Sold

Brand new set of Traction Master traction bars for 67-73 Mustang/Cougar. $100 and I'll split the shipping with you.

Brand new set of Traction Master traction bars for 67-73 Mustang/Cougar. $100 and I'll split the shipping with you.

The baffles are included.

The baffles are included.

Price lowered $250 or offer.