Rudolph Schenker

per request..................... Of course I will replace the parking lever boot and handle,,,, the fitting was easier than I thought it would be, once I secure the console and place the carpet I think it will look reasonably good:yes::yes:

Wheels are for mock up only, they are some old Centerline wheels off a C4 Vette. They are 16 inch, not sure of the width. However, I plan on 18's in the front and 19's in the rear.

Wheels are for mock up only, they are some old Centerline wheels off a C4 Vette. They are 16 inch, not sure of the width. However, I plan on 18's in the front and 19's in the rear.

I bought a 2005 ebrake handle off Ebay, I'm hoping to modify it to fit off the trans tunnel. :sweatdrop:

I bought a 2005 ebrake handle off Ebay, I'm hoping to modify it to fit off the trans tunnel. :sweatdrop:

few more............

few more............

more test fitting...........................:yawn:

more test fitting...........................:yawn:

Driver's torque box replaced..... In tank fuel pump............ Brake and fuel lines being plumbed............ radiator test fitting..............

few more............ modifying trans tunnel.......... has been going a bit slow (had other things going on), I plan on picking up the pace as the weather improves :001_smile:

couple more pics................

It's TCI's Kit. Here is the link.................. http://www.totalcostinvolved.com/ look for Mustang rear suspension.

It's TCI's Kit. Here is the link.................. http://www.totalcostinvolved.com/ look for Mustang rear suspension.

More subframe connectors............

More subframe connectors............

Sealed and primed!!! :drool: diff. test fit and axle fitment!! Sub-frame connector fitment.................

Looks good to me! :thumbup:

Nice work! :thumbup1:

Adding the additional strip brought the inner fender well almost even to the rear frame rails. Gave me an additional 1 1/2 inches. Hopefully this will allow wider tires.

That steering wheel looks better than when it came from the factory! :punk:

1 wheel well done, 1 to go.............

Love the stance, and color!

Looking forward to more progress pics! :thumbup1::thumbup1::thumbup1:

Those seat tracks look soooo much better! :punk: