69Stanger408 82 Report post Posted May 2, 2020 Getting to the final finish and have a question on the dash pad alignments. I have an original tooling dash from Dashes Direct, all else is original. I removed the lower dash and everything else for paint. Trying to install and have misalignment issues as you can see from the pictures. The three screws are installed in the pad at the windshield side, however having trouble trying to screw in the lower screws. I removed the adjusting bolts on the lower portion of the lower dash (left and right door areas). Is there more that needs to be loosened? I know their are some adjustments behind the instrument cluster (the u-shapped horse collar) which supports the steering wheel, does this play a part? Any insight would be appreciated. Pictures are of radio area, instrument cluster, and clock panel. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted May 4, 2020 I wouldn't say there's a huge amount adjustment in the lower part, but it should fit better than that. If you still had your original dash, that would tell you what's off. Quote Share this post Link to post Share on other sites
69Stanger408 82 Report post Posted May 5, 2020 I do have the original, guess it's swap time to see Quote Share this post Link to post Share on other sites