Lets See Amps and Speakers in the Trunk and rear seat section :)

[juit 34]

show me some pics specs and howtos I know you want to show me that bass! :P

[juit 34]

anyone there?

[mustangstofear 608]

Here's what we make.

 

http://www.mustangstofear.com/page.php?page=parts_catalog&yr=69-70&cat=interior∏=complete_interior_package

[juit 34]

Thats for coupes too?

[Alan_Mac 48]

 

View with the back seat down.  I designed this aluminium mounting plate that is bolted to the two OEM brackets on the floor.  Two pioneer amps, JL Audio sub in the trunk, two BA 6x9's on the package tray and 4 Focal bridged speakers (3.5, 4.0) in the dash.    

 

[juit 34]

is it a fast back?

[Alan_Mac 48]

yes, it is a fastback

[juit 34]

nice clean set up

[zach69grande 25]

I saw somewhere that listed these for a 69 - I'd like to put something like this in my coupe - 6x9's in the package tray mounted from underneath and component 5's in the doors and this for the bass
http://www.cjponyparts.com/custom-autosound-backseat-driver-subwoofers-and-amp-kit-coupe-1965-1968/p/SPKBSD/

[juit 34]

but that goes on the seat or what? I have 2 12 with an enclosure box

[zach69grande 25]

back of the rear seat

[juit 34]

like if you take out the seat that will stay on the car? 

[LindenBruce 27]

I built a flat platform at the front of my trunk and right behind the non folding rear seat.  It's 3/4? MDF?  I had to make the platform out of two pieces to get it to fit.  It has a stiffener along the front edge.  Once it is screwed together and bolted down I finished laying the carpet.  I circled the factory bracket it is bolted to in a blue circle.   There is one on each side even though I only posted one of the pics.  Then I made a box to slide onto that.  I mounted two 12" pioneers into that.  I don't have the amp yet but all wiring is run and ready for a head unit and hook up.  They are mainly for LFE.  Wiring runs down the passenger side of the car where nothing is run by the factory anyway.  Take a look at the pics.  B.

 

 

 

[juit 34]

I didnt get some pics, put that looks clean

[juit 34]

How and were did you run your possitive wire for your amps?

 

To get it out the cabin

[LindenBruce 27]

I ran a hot wire from the starter through the firewall into the cabin. I used a spare hole in the firewall after adding factory A/C.  So no additional holes in my original firewall.  I then added a fuse box in the dash glove box for future accessories.  From there I ran all of my wires down the sill plate channel on the passenger side.  Where they route to the trunk just like the factory wires on the driver side.  Piece of cake.  If i have pics of that I will add them in a few days.  B.    

[juit 34]

cool ill wait for the pics

[juit 34]

anyone have more pics?