rockhouse66 22 Report post Posted November 9, 2015 I have been rebuilding smog pumps and need some cores. I am looking for the ones with the 7801149 casting number on the back plate. Generally paying $250 for one that is complete with the smog elbow and less for those without but will negotiate. Will need a photo to determine value. Call if you want to describe what you have: seven seven oh 8 two 3 one 37 zero. 8AM- 8PM Eastern please. Quote Share this post Link to post Share on other sites
Rsanter 152 Report post Posted November 12, 2015 I haven a ton of smog pumps. What is the original applications for the ones that you are looking for? Most of mine are from 289s and 390s from the 60s mustang era Bob Quote Share this post Link to post Share on other sites
rockhouse66 22 Report post Posted November 12, 2015 Bob - usually the 289 ones have the two ports in the back plate, and I can't use those for anything because they are also different internally. I think most of the 390 ones look like the picture I posted on the back. If you have any that look like that - with either a pressed in nipple or the bolted on elbow - and the 7801449 numbers then those are the ones I need. Even 6-cyl cars in the 68-70s range had these though they are the ones with the pressed in nipple. I might even take a "ton" :-) Quote Share this post Link to post Share on other sites