PS engineering / vintage wheel work wheels and 315 tires

[970fizz 19]

I'm thinking about placing an order on some 17x8 and 17x9.5 PSE T/A 2 wheels, and putting 315x35x17 nitto tires out back But I would like to see pics of them on mustangs first! Any one running PSE wheels? Or VWW wheels in 17's

 

Post pic, size , backspacing (offset), tire size and brand.

 

Thanks.

[70fastbak 16]

I'm running 315's on my 70.

Not on the wheels your asking about.

I'm running 2004 deep dish mach1 wheels, 17x10.5's.

I have pictures if you need to see.

[970fizz 19]

I think I've see a pic, but sure post one up.

Do you know the back spacing?

[MOCK 302 10]

I have VWW on mine , 17 by 8 front and 18 by 9.5 with 285 40 on the rear .

[970fizz 19]

I have VWW on mine , 17 by 8 front and 18 by 9.5 with 285 40 on the rear .

 

Do you have pics? I didn't think VWW made 18's

Edited August 7, 2014 by 970fizz

[Wycked69 20]

I'm running 315's on my 70.

Not on the wheels your asking about.

I'm running 2004 deep dish mach1 wheels, 17x10.5's.

I have pictures if you need to see.

 

 

Photo's please......... What clearance issues do you have?

[buening 63]

You may have some tire bulge with the 9.5" rim width and a 315, so keep that in mind. Below is a link to my thread with the Sumitomo 315s on my car. Below the link is a handy figure Grabber70Mach put together.

 

http://www.1969stang.com/mustang/forum/showthread.php?t=9551

 

 

[MOCK 302 10]

click on my photo