Steering Rag Joint Replacement

[RPM 1,190]

Before I destroy it, is there an easy way to remove the old one? Thanks.

 

Bob

[69mi 10]

its been a while...but i think u have to drill out or grind off(from the back side) the old studs to get them off. i only removed two of them(the small diameter studs) and left the large diameter studs in place. if i remember correctly, you have to remove two studs to get the thing apart, then you can use the two smaller replacement studs that came with the rag joint kit.

[RPM 1,190]

Thanks 69mi right you were, finally got around to replacing it. Wouldn't have needed to ask if the included instructions were read.