jeepcj7304 10 Report post Posted September 28, 2012 I am looking to see if anyone has access to a manual on how to assemble the front end (headlight buckets, fenders, valance, front trim, bumper, etc) I am trying to put the front end of my project together to get it ready for paint but need to know how some of the pieces go. For example there is a L bracket bolted to the radiator support that appears to go to the headlight buckets but I dont think they are in right since they are almost an inch from the bucket mounting point and is in the middle of the headlight area. If someone has one and scan them it would be a great help. Quote Share this post Link to post Share on other sites
Nightowl 10 Report post Posted September 28, 2012 Do you have a pic of what you are describing? My front end is torn down, so if you have pics, I might be able to help. :smile: Quote Share this post Link to post Share on other sites
jeepcj7304 10 Report post Posted September 28, 2012 Here is the part that I am trying to mount right now you can see that the bracket doesnt come close to lining up. Quote Share this post Link to post Share on other sites
Nightowl 10 Report post Posted September 28, 2012 Is this the bracket you were talking about? Richard Quote Share this post Link to post Share on other sites
jeepcj7304 10 Report post Posted September 28, 2012 yes as you can see in my pictures the bracket has a large gap between the part where the headlight bolts to it and the bucket. I am not sure how to make up that space. Quote Share this post Link to post Share on other sites
RogerC 136 Report post Posted September 28, 2012 (edited) Going from memory which isn't as good as it used to be, front holes on fender to front side of radiator support are slotted. Looks like front of fender needs to move outboard and flip the nut clips to the other side of the bracket like nightowl's left side. Thinking about it some more, I think the radiator support holes behind the bracket are slotted also. Edited September 28, 2012 by RacerX Quote Share this post Link to post Share on other sites
manley 13 Report post Posted September 28, 2012 (edited) It looks like you may have the wrong side bolted to the radiator support. Maybe not... Edited September 28, 2012 by manley Quote Share this post Link to post Share on other sites
ggieras 10 Report post Posted September 28, 2012 If I were you I would invest in the mustang body assembly manual(and the rest of the series by Jim Osborne)they are worth their weight in gold and take all the gueswork out of re-assembling your mustang,each manual is about 15 bucks from any of the suppliers,I did a fold down conversion with the help of the interior manual(70 stang)best money ever spent Quote Share this post Link to post Share on other sites