MustangChuck 16 Report post Posted July 11, 2012 I want to start off by saying that "bagging and tagging" isn't my problem. My problem is remembering what I did with those tagged bags after four years and two moves. I thought I had stored the bag with the oil pump pickup tube and pan screws inside the oil pan. When I finally dug it out, I didn't find the bag in the pan. I am still searching, but my unsearched locations are getting fewer. So, can anyone tell me what oil pump pickup tube will work with this pan? I don't know who made the pan. It is a 9 quart, front sump pan for a Ford 302. It came with my 69 when I bought it in '98. It was used when the previous owner put it on, so it's very likely older than 15 years. I plan to put the pan onto a 1994 5.0 from a Mustang GT. I should be able to reuse the pan bolts, so I'm not worried about them. Just the pickup. Thanks, Chuck Quote Share this post Link to post Share on other sites
MustangChuck 16 Report post Posted July 13, 2012 I got to digging on the Jegs and Summit Racing web sites and found this picture. When I got home, I measured the pan and the numbers match. While I am not 100% sure it is a Moroso pan, it is certainly close enough for me to use this pickup. That's the good news. The bad news is that the pickup is $46. But, that's still cheaper than a new pan and pickup. Thanks, Chuck Quote Share this post Link to post Share on other sites