cobra460jet 10 Report post Posted February 29, 2012 Does anyone have a picture of the correct way to install the attachement hardware for the eyebrow mouldings? My body assembly manual doesnt show a very clear picture and my digital pictures are lost... Quote Share this post Link to post Share on other sites
cmz69 10 Report post Posted March 1, 2012 What do you mean by "eyebrow" moldings? My molding is installed with a screw like piece that slides into molding or special clips like around windshield. I have my Manuel, but do not exactly know what molding your talking about unless it's aftermarket Quote Share this post Link to post Share on other sites
TexasEd 191 Report post Posted March 1, 2012 Is this for a Shelby/GT? The other 69 body styles don't have what I would call eyebrow molding. The parts above the headlights below: Quote Share this post Link to post Share on other sites
cmz69 10 Report post Posted March 1, 2012 Ah, ok. Don't think my book has it. I'll take a look and let you know, may take a day or so. I'd assume it's the same crew like piece as multiple Ford models have similar parts in common. My book covers mustang, tourino, fairlane, and few more. Quote Share this post Link to post Share on other sites
cmz69 10 Report post Posted March 3, 2012 ok, unfortunatly i did not find anything on the shelby. however, as i mentioned they usually used similar mounting hardware so here is a pic of rear for mustang and front for thunderbird. looks like they are the screw like piece or the push on pin clamp. i hope this helps. Quote Share this post Link to post Share on other sites