Flanders 46 Report post Posted November 22, 2011 I've got my engine and transmission out (doing a rebuild with toploaderheaven.com kit) and I'm wondering if I should be changing my clutch disc before I put everything back together. The disc doesn't look too bad to me (a non-experienced eye), and the clutch wasn't slipping at all before I took things apart. Is it a decent idea to replace the clutch disc, while I'm in there? I'd like to avoid having to take the engine/tranny out for a looooong time, so I'm making an effort to replace some of these things now before they get a chance to fail or get noisy (ie. I'm replacing the throw-out bearing too) Quote Share this post Link to post Share on other sites
LoneWolf2U 136 Report post Posted November 22, 2011 In short... Yes replace it. You should replace them in a set, Clutch plate, pressure plate and throwout bearing. Better to do it all now and not have to be towed back later. :ohmy: Quote Share this post Link to post Share on other sites
Flanders 46 Report post Posted November 22, 2011 recommendations for a stock clutch replacement? Not looking for anything with more holding power...can one still buy OEM? Quote Share this post Link to post Share on other sites