jemmafrank 10 Report post Posted September 16, 2011 Hi I have checked through all the mustang catalogs, where do find the combination/proportioning valve for a 69 Mach 1 with disk front, drum rear, with SIX ports. 3 on top with sender, one out the front and two underneath. Please Help me. otherwise is the only alternative a rebuild ?? Cheers Quote Share this post Link to post Share on other sites
stangs-R-me 121 Report post Posted September 16, 2011 I searched earlier this year with no luck but at least found the rebuild kits from ... http://www.musclecarresearch.com/ ... they have kits for both the distribution block AND the '67-69 round style proportioning valve. Look though their whole catalog as there are other things for '69 that they offer that I've never seen available anywhere else including lower steering column seals and the booster at firewall gasket. I had actually bought a brand new distribution/proportioning valve combo for a '67 hoping I could make that work but none of the tube nut connections were the same and damned if I was going to butcher up my brand new '69 spec line set !! I guess you could buy a '67 line set with this block and it may just all fit on a '69 ... I just did not want to buy a 2nd line set to find out. Doug Quote Share this post Link to post Share on other sites
MikeStang 247 Report post Posted September 16, 2011 Hate to say it but Mustangs unlimited Part # 1350KF is the block with bracket and Lines to master cyl May work for ya Mike Quote Share this post Link to post Share on other sites
SunnDogg 18 Report post Posted September 16, 2011 Has used parts for sale. I rebuilt mine using the kit from Muscle Car research and it is pretty simple to do. They have instructions on their site you can download and the link below has the part and a video on how to do it. They offer a kit as well. Hope this helps. http://www.cougarpartscatalog.com/c8zz-2b257-a.html Quote Share this post Link to post Share on other sites