BuckeyeDemon 211 Report post Posted February 27, 2011 (edited) 1. passenger side kick panel 2. plastic seat back for a high back bucket 3. mach 1 instrument cluster plastic (driver's side and passenger side). i only need the base plastic part. not all the other pieces. 4. headlight trim band X 2 (stainless, holds the headlight) No cracks or chips. Good grain required. Black is a preference, but not required. I don't want any plastic that's been repainted. the stainless can be weather as i will polish it out. Any deviations from above (i.e. a drill hole some where, chip) i can possibly work with, but would like pics. Thanks. Edited February 27, 2011 by BuckeyeDemon Quote Share this post Link to post Share on other sites
bobh67 18 Report post Posted March 1, 2011 I have part 1 and part 3 for you ...bobjanhaverland@aol.com Quote Share this post Link to post Share on other sites
BuckeyeDemon 211 Report post Posted March 4, 2011 a kick panel has been procured. i'm still in search of all other listed items. Quote Share this post Link to post Share on other sites
rangerdoc 22 Report post Posted March 4, 2011 Where's the post for the cluster? Someone just had it up. Here it is. http://www.1969stang.com/mustang/forum/showthread.php?t=9404&page=2 Well, never mind. Just noticed you said Mach 1. Quote Share this post Link to post Share on other sites
rangerdoc 22 Report post Posted March 4, 2011 I have the headlight trim but they need to be polished. Quote Share this post Link to post Share on other sites
