upper inner door trim

[66stang 11]

I am geting ready to do my door panels i have standerd interior do you need special clips for the upper trim panels http://www.cjponyparts.com/inner-door-trim-upper-left-1969-1970/p/DTU1L/

[jerr_man 11]

there are metal horseshoe looking clips that screw to the door and the trip piece snaps on> wish i had a picture for you. maybe someone else here does

[66stang 11]

can you get them from cj pony parts or npd

[jerr_man 11]

hope the link works, this is out of the latest MM magazine. putting 70 glass in a 69 write up. the 2 clips are screwed into the door you should wee them where the top panel goes

 

http://www.mustangmonthly.com/howto/mump_0405_how_to_install_1970_door_glass_in_a_1969_mustang/photo_06.html

 

forgot to add this. i checked CJ,NPD,Scott Drake and none of these guys sell the part

Edited October 7, 2010 by jerr_man

[Black_69_FB 49]

I have one clip that came with my doors I bought for the Mach 1. I have the deluxe door panels, so I don't need it. It'll only get you 25% of the way there, but you are welcome to it if you want it.

[Max Power 74]

there are metal horseshoe looking clips that screw to the door and the trip piece snaps on> wish i had a picture for you. maybe someone else here does

 

 

The piece doesn't really snap on to those as much as it rests on it. The piece is actually held on by two screws, one front and one rear. The piece just kinda rests on those clips.

 

Rarely are they missing, and since I just converted to deluxe, if the OP needs a bunch, I can look and see if I saved mine.

[66stang 11]

mine are missing that would be great if you saved them let me know if you have them thanks

[Max Power 74]

mine are missing that would be great if you saved them let me know if you have them thanks

 

I will look tonight.

[Max Power 74]

I got em. There are 4 total. PM me your address and I will mail them to you.

[66stang 11]

Thanks for looking sent you a PM

[66stang 11]

Thanks for the clips and the book was nice it will come in handy when i do the rest of the car Thanks Doug