69_302RustangFB 10 Report post Posted May 6, 2007 Has any one installed a 302 serpentine set up on there engine? I'm thinking about it and looking for any suggestions. Share this post Link to post Share on other sites
Protowrxs 111 Report post Posted May 7, 2007 I am still debating on going serp or standard on mine. If you go with a single serp like the 5.0's you can get all you need off a late model 5.0 but you'll need to replace the front cover I believe and water pump (reverse rotation) as well. March offers a serp setup that uses a standard rotation water pump and pully in aluminum but pricing is way out there especially if you need A/C and Power Steering. Just my opinions.. -Stephen Share this post Link to post Share on other sites
Blaze86Vic 10 Report post Posted May 7, 2007 If all you are running is an alternator, power steering pump, and water pump, you can get the setup from a crown Victoria. The stock 5.0L CV uses 2 serp belts, one runs alternator, power steering pump, and water pump (the tall one like on your cars) and the back belt runs the smog pump and A/C. Share this post Link to post Share on other sites
