Vacuum diagrams needed

[jerry 10]

Where can I get diagrams of the proper vacuum routing? I displayed my lack of knowledge in an earlier post when I indicated I had a DP Holley of unknown size when it turns out I actually have a 600 cfm holley with vacuum secondary. Currently the vacuum line coming off the base of the secondary is plugged, vacuum lines are loose under the dash and a couple of lines under the hood are plugged. Thanks

[Armond 10]

What does your car have? Air? Tilt? Power ventilation? Plain no options? I can post a pic for you if I know just what you have.

[jerry 10]

351W, Power steering, A/C (currently in-op), no power ventilation I know of. I've had the car a whopping 1.5 weeks. Thanks

[Armond 10]

Here is one shot of the AC out of the Ford dealer service manual.

[jerry 10]

excellent diagram

[jerry 10]

My engine is 351 W and it has an Edlebrock 2181 intake manifold and a holley 4160 600 cfm with vacuum secondaries (thanks to the forum for the info). The vacuum line from the back of the carb is plugged and I see a couple of smaller vacuum lines loose. There is currently no linkage to the choke mechanism, manual or vacuum. Could anyone help me with the under hood vacuum diagram and or needs?

[Pakrat 1,043]

Is your distributor a vaccum type still or is it now mechanical? If it was converted to a mechanical (like mine) then that could be why some hoses are plugged.

[jerry 10]

The distributor is vacuum and the vacuum line is attached.