kblagron 20 Report post Posted January 11 I am installing a fold down seat into a 1970 Mach 1 that had fixed seats before. I shamelessly stole a photo I found on here that shows bracket locations for the fold down seats. I have already learned I need both #1 brackets, and one of the #2 brackets. Then I noticed that I don't have either of the #3 brackets. I guess the previous owner took them out when replacing the floor pan and never re-installed. Are the #3 brackets needed for a fold down seat car? I can't see where they would be as I assume they are for the rear seat back, but maybe I am wrong. Quote Share this post Link to post Share on other sites
kblagron 20 Report post Posted January 11 Well I think I figured out my own question. I went and dug out the rear seat that was in the back of a closet (waiting to be installed for a long time), and I saw where those brackets are at the very top of the seat bottom, so guess I have two more brackets to weld on. Quote Share this post Link to post Share on other sites
Ridge Runner 1,113 Report post Posted January 11 Yes ,you need all three brackets ,#1 is the seat back hinge bracket, # 2 is the floor behind the fold down and # three is what the seat botton hooks on . Quote Share this post Link to post Share on other sites
