hoss69

Hi Mike, thanks for you're reply. Your jig looks great. What size is the box section you are using? And will you be raising the jig off the ground so you can get under the car? Happy new year.....Mike.

Hi Tony, The dynacorn option would great but I don't have £16,000 to buy one. Even if I had the money I still wouldn't buy one as I get a lot of satisfaction out off doing all the work myself. Have had two 70 Mach1's in the past and both needed new floors and stuff, but not as bad as this one. Silk purse out of a cows ear comes to mind. I already have some parts coming over in a container from sts imports that should be here in a week or so. Will also be going to Toronto, Canada in the summer to see some friends,so will be doing some shopping at Golden leaf automotive and any swap meets I can find......Thanks for you're reply, and wish you a happy new year.....Mike.

Hi Guys, have just joined up and hope you can help with my resto. My car is a red on red 69 Mach1 with original drivetrain. Has a tach dash,tilt steering column and fold down seat. Now the bad bit! It has rust everywhere. The only part worth saving will be the roof. Would like some ideas on where and what to replace first. I.e inner and outer sills,rear frame rails, A and B pillars.... Will be making a jig as passenger side rear spring hanger has come up through the trunk floor so will need measurements. I saw the frame chart that Mustang chuck put on here,but there seems to be a discrepancy at "A" being 12 3/4 and the rear off rear frame at 11 3/16. Any help would be much appreciated.

Hi Guys, have just joined up and hope you can help with my resto. My car is a red on red 69 Mach1 with original drivetrain. Has a tach dash,tilt steering column and fold down seat. Now the bad bit! It has rust everywhere. The only part worth saving will be the roof. Would like some ideas on where and what to replace first. I.e inner and outer sills,rear frame rails, A and B pillars.... Will be making a jig as passenger side rear spring hanger has come up through the trunk floor so will need measurements. I saw the frame chart that Mustang chuck put on here,but there seems to be a discrepancy at "A" being 12 3/4 and the rear off rear frame at 11 3/16. Any help would be much appreciated.