ramair351

as long as the both work the same, i would just pic the better looking one. i prefer 2150's myself

17x8 Ridlers

that style in fair/good condition usually are 10-15 each.

I have had torinos for 25 years. they are styled steel wheel centercaps, 76-79, torino LTDII . granada even used them. are they for sale?

cowl panel removed! thanks guys

found one!

head casting number for cj and scj are the same DOOE-R , look for that number right above the two center exhaust ports

i may have learned something new today too!

i sold a nicely rebuilt fmx with a TCI convertor and a shift kit, and could only get $400 out of it. much more $ than that people like to upgrade to c4, c-6 or AOD

does it have all the oil cooler stuff? the right exhaust manifolds? carburetor? that stuff is worth a couple grand right there. get some numbers off this stuff.

its a nice looking car, but not a mach 1 , just a sportsroof by the vin. 3rd and 4th digits for a mach 1 is 05 not 02

it will bolt up, but the fmx uses a 164t flywheel, and your 302 may have the 157t. check your balance if you change flywheels, they can have different weights

been tinkering with it. i went to change out the sport lamp bulbs, and next thing i know i have taken the whole grill out for repainting and detailing. it still had the original bulbs in it, and none of it had been apart that i can tell. nice taking apart a 1970 ford product and have the grill be ROCK SOLID and uncracked, unlike the torino cobras i am used to. also have the cowl panel off to get repainted, and i can detail underneath also.

need RH side wiper pivot/splined thing. and good plastic cover for the wiper mtr. 1970 mustang

i cant find one in any books, but they get so brittle i am suprised nobody does

yup 1157 amber thanks. i figured out how to get it apart after i took the whole grill out. my gasket was just dried like cement. my lamps had the original bulbs, they had never been apart, and the grill had never been out. fun fun.

ummm steering wheels?

wow very detailed response, i will check it out, thanks!

i cant even figure out how to take it apart. i managed to get the metal cross hair part off, but how does the clear lens come off?

i cant find it listed in the parts plus catalog. anyone know? i believe they should be amber.....

does anyone know where the rear trunk light ( for light group) would plug in at? i found a connector by the latch/ fuel neck assy, but dont know if thats it. i am thinking about adding it.

the plastic cover for the windshield wiper motor? 1970?

got it off. thanks for the tips. my RH arm wouldnt budge those, and the splines were all chowed up, i think someone had put loctite on it before. so i am on the hunt for a RH pivot/spline assy. anyone? 70 mach one

i am looking for a RH passenger side wiper pivot, the part with the splines on it. let me know, thanks

all square here now, thanks maniac!