brandos69stang

I have the toploader you need. check your PM

I am looking for the following clips / fasteners. These are used to attach the narrow trim panel that is above the trap door on a 69 - 70 fastback. I need 6 of each pictured. anyone have an extra set, or know where I can find some? thanks

looking for a full set of headliner bows for a 69 fastback. let me know if you have a set and what you want for them shipped to CA send PM

looking for a full set of headliner bows for a 69 fastback. let me know if you have a set and what you want for them shipped to CA send PM

Now thats some rubber!

can someone tell me what BFH is? it is Not in the english dictionary! id love to see those pics of the 335 with the mini tubs

I do have a nice moch up tire/wheel. I have a 17x9.5 with 6" BS with a 275/40/17, Right now there is a good 1.25" from the inner tire bulge to the inner wheel well everywhere except that front lower section, where its about 1/2" there. if I do trim this closest corner , i will be able to go a wider wheel, with more backspace maybe 6.5-7" and be able to use a 305? or 315? the bump stop ear clears everything, because i have 17's , but will trim it anyone out there thats done this "piecut " trim id love to see pics and what tire you were able to squeeze in there. thx

I got a 69 Stang looking to fit the widest rear tires and get some custom wheels made. I have 4 link rear end with coil overs out back, so the leaf springs are gone. I dont want to go the mini tub route, but wanted to inquire and see if anyone has pics and info on doing some clearance mods? The first place the tire bulge will hit is the inner wheel well down low towards front. Done the sledge hammer thing, but still want to gain more clearance in that area. Has anyone done a partial cut and patch of that area with success. any pics and info would be awesome

no longer avail

no longer avail

no longer available.

UPDATE : The owner of the car, has decided to put the car in the up coming Russo Steel auction in January, I believe it will be held in Vegas at that time. They may have this car featured on their website very soon thank you for your interest, and good luck if you decide to bid

more build pics

build pics

some more

more

many pics

pictures:sorcerer:

and some more

some more pics

Listing this for a friend, who isnt the best with computers. 1970 Mustang Fastback Mach 1 0R05M132... Grabber orange exterior Black Interior 351C 4v Toploader 4 speed wide ratio 3.00 (upgraded to Posi) Power front disc brakes AC History: parked indoors for 20+years, Purchased from the original owner with only 45,893 original miles. Included are the original warranty dealership card, registery card with the original owners name and info, buck tag included too. Then the car was professionally restored and registered into the new owners name. Nut and Bolt full professional rotisserie restoration numbers matching engine & transmission Under 100 miles since restoration was completed 46k original miles on car all sheet metal original to car and only driven 100 miles since. Nothing was spared restoring this car to concourse quality. A lot of patience, money and time went into this build. appraised in 2008 at completion of restoration for $109k ! selling for $59k Prefer a local person to person sale with cash, If you are out state or country perhaps you know someone in southern california that can handle the transaction for you? I can also recommend a shipper with good rates for export. If you have any interest or have any questions, PM me your phone number and i will the owner call you. The car does exist and is absolutely beautiful, and the cleanest car ive ever seen. I took most of these pictures myself. car is located approx. 25 east of Los Angeles , and 5 miles west of Pomona fairgrounds. I will post as many pics as I can here so you have an exact idea of what caliber the car is.

gone

PM replied to ,

seats have been sold

Brand new, never used reproduction shaker set up. Everything you see is fiberglass except for the rubber boot. the grill inside the scoop is slightly broken and missing the far right section. Can be totally removed and left open, or replace it with a screen or mesh? These retail new for $525.00 i am selling this for $450 FIRM. This is a picked up with cash price. If there is shipping and any other form of payment involved, the price will be considerably higher, Located 30 miles east of LA , near Pomona fairgrounds PM for contact