dimentions for decal installation on door ???

[Jetmech 3]

Can some please measure the distance from the lower door edge to the lower decal for me . I would like to get the new decals installed as close to the factory location as possible.

[Mach1 Driver 560]

My Mach is all original and is 7 9/16" from the bottom of the door to the bottom of the bottom most stripe (measured at the front of the passenger door).

[Jetmech 3]

My Mach is all original and is 7 9/16" from the bottom of the door to the bottom of the bottom most stripe (measured at the front of the passenger door).

Thank you for your help ! Takes the guess work out of it !