Raven R code 281 Report post Posted June 6, 2014 Does anyone know if there is a way to bend a tab on the pot metal headlight bucket? I know they can be fragile but not sure if maybe heat can do the trick. Thanks Quote Share this post Link to post Share on other sites
mystangalang351 12 Report post Posted June 6, 2014 Heat will work but take your time and dont overheat. It will work cause I have done it. Good luck! Quote Share this post Link to post Share on other sites
dpuwookie79 11 Report post Posted June 6, 2014 Agreed with mystang - you need to take your time with pot metal. If you force it, it will break. It took me a couple of weeks of massaging to get the quarter panels ornaments to fit again after a season of being off of the car. I did not use heat... I simply went out and tightened the quarter ornaments a little more each day and eventually it conformed to the quarter panel. Quote Share this post Link to post Share on other sites
