Chris'69Mach 23 Report post Posted April 16, 2013 I am looking for 2 rubber wire looms to run electrical from door to door jam. Does anyone have suggestions where to get them? There is already a hole on the door jams but not on the doors themselves. I am looking for something like this http://www.google.com/shopping/product/10957311566205052848?q=rubber%20door%20wire%20loom&hl=en&rlz=1T4GGLL_enUS365US365&bav=on.2,or.r_qf.&bvm=bv.45218183,d.dmg&biw=1536&bih=739&wrapid=tlif136614964467310&sa=X&ei=ScptUarHMrPH4AOH6YDQCQ&ved=0CFIQ8wIwAA Quote Share this post Link to post Share on other sites
miketyler 15 Report post Posted April 17, 2013 What's wrong with the ones you have listed? Quote Share this post Link to post Share on other sites
Chris'69Mach 23 Report post Posted April 17, 2013 I dont know if there is anything wrong with the ones I have listed. The unknown about them is, are they the right size for the existing hole in the door jam. If the end is too big, I can workwith it, if the end is too small,then I cant. Quote Share this post Link to post Share on other sites
miketyler 15 Report post Posted April 17, 2013 (edited) I ran into this on the door side on my 70 MAch using later model Mustang boots. I made a reducer ring and bonded it to the inside of the door. Hardly noticeable and very undo-able for the next owner. http://www.1969stang.com/mustang/forum/showthread.php?t=13329 Edited April 17, 2013 by miketyler Quote Share this post Link to post Share on other sites
danno 128 Report post Posted April 17, 2013 I think the 69 and 70 Mustangs just used a large diameter rubber hose type of deal. It has a inside diameter of about a half inch and goes from the grommet on the door opening to the grommet on the chassis opening. Quote Share this post Link to post Share on other sites
Chris'69Mach 23 Report post Posted April 17, 2013 I ran into this on the door side on my 70 MAch using later model Mustang boots. I made a reducer ring and bonded it to the inside of the door. Hardly noticeable and very undo-able for the next owner. http://www.1969stang.com/mustang/forum/showthread.php?t=13329 Well Mike, from the looks of the pic, it appears to be the same ones I bought. Good thing for me is, I do not have a hole in the door, I have to drill it out myself and should easily get the loom to fit with no issues. Thanks!!! Quote Share this post Link to post Share on other sites
miketyler 15 Report post Posted April 17, 2013 I used them and they have plenty of room for all the gadgets I ran in my doors. Quote Share this post Link to post Share on other sites
Chris'69Mach 23 Report post Posted April 17, 2013 Good to hear .... I am just running speaker wires and remote door lock wires for now through them. Quote Share this post Link to post Share on other sites