3906pack 10 Report post Posted October 13, 2009 Bought an old FE engine and when I recieved it it had a set of C8AE-H heads on it. But the exhaust ports have 4 bolt holes on 2 of the ports, not just two straight across. Doesnt seem like its a home job that put the other holes in. The heads do not have the threaded holes with the plug at the top of the exhaust port on the outside like the CJ heads. Nor do they have ajustable rockers. Anybody come across this before? I was told it was from an 69 stang. The intake isnt from a stang either. Thanks Quote Share this post Link to post Share on other sites
3906pack 10 Report post Posted October 13, 2009 ok, just learned that the heads are 390 gt and that they are the ones which come with the 14 holes, instead of the 16 like cj. Still a good find apparently.. click on and read the amusing chatter..... www.ford-trucks.com/forums/66250-c8ae-h-360-390-heads-are-they-good-ones-2.htmlpparently.... Quote Share this post Link to post Share on other sites