Jump to content

3906pack

Members
  • Content Count

    66
  • Joined

  • Last visited

About 3906pack

  • Rank
    Mustang Owner
  • Birthday 02/28/1966

Converted

  • Biography
    41, male, love burning gassoline.
  • Location
    Mississauga,Ontario,Canada
  • Interests
    Building cars, drag racing, collecting Honda 50s, having pretty girls around the racecar.
  • Occupation
    Induction, flame hardening metals specialist.

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Pulled out a power vent from another car and took everything I needed. So my questons to you techies are: There is a vacuum canister, mines rotted, they make repops or use an apple juice can? Do I have to remove the complete dash to get the new heater box in? Does anyone have a vacuum line diagram? Thanks....
  2. How in the heck do you replace the ignition key cylinder from the housing with the switch and terminals from a 69. Ive removed the unit from the car. Im about to freak out.......Whats the trick boys?
  3. How in the heck do you replace the ignition key cylinder from the housing with the switch and terminals from a 69. Ive removed the unit from the car. Im about to freak out.......Whats the trick boys?
  4. Are those 4 inch wide x15 front runners on that badboy?
  5. needed a new pair and used repo and they are good. No complaints....Go ahead with these....
  6. Hey spoofy, happy birthday ...........Dyno

  7. Hey spoofy, happy birthday ...........Dyno

  8. Hey spoofy, happy birthday ...........Dyno

  9. ok, just learned that the heads are 390 gt and that they are the ones which come with the 14 holes, instead of the 16 like cj. Still a good find apparently.. click on and read the amusing chatter..... www.ford-trucks.com/forums/66250-c8ae-h-360-390-heads-are-they-good-ones-2.htmlpparently....
  10. Bought an old FE engine and when I recieved it it had a set of C8AE-H heads on it. But the exhaust ports have 4 bolt holes on 2 of the ports, not just two straight across. Doesnt seem like its a home job that put the other holes in. The heads do not have the threaded holes with the plug at the top of the exhaust port on the outside like the CJ heads. Nor do they have ajustable rockers. Anybody come across this before? I was told it was from an 69 stang. The intake isnt from a stang either. Thanks
  11. There have been a few scams up in my neck of the woods, Ontario Canada were they say the car is at another location and if you send the money they will ship it to you sight unseen. Ya right............Dont even waist your time...Who in their right mind would give you such a deal. Only deals I know are the fire sales because of divorce....
  12. Just recieved my boss 9 engine stroked to 514 keeping the standard bore with the Tod Miller heads built by Shotgun Hemi Parts in Detroit by Eric Simone. Runs on pump gas 10.5:1 made 594 bhp @ 6000 rpm. with 640 lbs of torque. Decided to go with hydrolic roller bumpstick, so im limited to 6000 rpm. Thats ok with me for the street...The T.Miller heads are in the engine masters competition and are currently ahead in the points. Kasse still has to run his engine yet. Thank god all these goodies are still made in the USA.....
  13. I have an excellent rear deck lid for your coupe, and some rear interior side panelsbasic steel, painted white and ones with a dark geen vynal with arm rests. A rear window, one quarter extention, not sure at the moment which side, and some other parts. Toronto, Ontario.
  14. Oh forgot to ask if anyone has a dash like it for sale in nice condition, or do they make the repop? Thanks fellas LOL
×
×
  • Create New...