sizemoremk 12 Report post Posted April 5, 2009 I have a 69 coupe, and I am in the final stages of wiring in the harness for my EFI swap. I took pictures of things, but cannot find one for the particular angle of the starter solenoid and voltage regulator area. There is a large eye terminal with two wires, a black and a black/red going into the alternator harness. It looks like it connects to eiteher a ground around the voltage regulator, or one of the starter solenoid lugs. For clarity, this is part of the 69 harness, not the EFI harness that I am installing. Can someone say with certainty which it is? Thanks guys! Quote Share this post Link to post Share on other sites
jmlay 80 Report post Posted April 6, 2009 There would not be a black on the solenoid lugs as this it power. This may help.: http://www.themustangshop.com/resources.cfm Quote Share this post Link to post Share on other sites
bnickel 10,004 Report post Posted April 7, 2009 can you post a pic of the wires you need to identify? that would help quite a bit with figuring it out Quote Share this post Link to post Share on other sites
bnickel 10,004 Report post Posted April 7, 2009 can you post a pic of the wires you need to identify? that would help quite a bit with figuring it out Quote Share this post Link to post Share on other sites