Tremec / TKO question...

[coz 108]

Anyone have a Keisler Tremec 5spd with a hydraulic clutch setup? Finally getting ready to complete the install and notice the master cylinder has the bleeder in the line and not on top off a bleeder stud like you would see on a brake. So I can't help but wonder how to totally fill it and expel the air? I think its a "self bleeding" system but what's that? Been a long process - hopefully all these upgrades I'm doing will work out....

 

Thanks for any help...

[bnickel 10,004]

self bleeding means you just have to pump it about 20 times to get it to bleed and then automatically does it on it's own every time you push the clutch in

[coz 108]

Ok so maybe I added "self bleeding". Here is a link to the kit - notice the Keisler-exclusive Bleedable Line listed as item # 3. See how the bleeder is inline. Hows that going to work with it being below and before the throw out bearing inlet?

 

http://www.keislerauto.com/mopar/transmissions/clutch-link-kit.html