anyone tried to use the ron morris t5 cable conversion

[cmrmach1 10]

Hello Everyone I'm A Long Time 69 Owner , But New To The Forum. I'm In The Process Of Doing An Auto To T5 Conversion. I'm Thinking Of Ordering The Ron Morris Cable Clutch Conversion For 65-68 Mustangs. I Read In One Vendors Catalog That It Will Work With Some Modification, But No One Could Tell Me What Mods. Even The Mfg. Couldn't Help Me. Thanks For Any Help In Advance.

[bnickel 10,004]

i believe on that steup that you have to cut into the cowl apnel and weld in a piece for more clearance. modern driveline has bolt in cable clutch setup for the 69/70 stang.

 

www.moderndriveline.com

 

here is the specific page

 

http://www.safepay.net/cgi-bin/shop/cart.cgi?db=mddata.txt&category=cable&merchant=moderndriveline

[cmrmach1 10]

THE PROBLEM IS AS I SEE IT IS IN THE BRACKET THAT ATTACHES TO THE PEDAL SUPPORT. I JUST DON'T KNOW IF I CAN ALTER THAT BRACKET AND ATTACH IT TO THE 69 STYLE SUPPORT OR IF I WOULD HAVE TO FAB A COMPLETLY NEW ONE. HERE'S THE PAGE WITH A PIC.

http://ronmorrisperformance.com/03clutch/index.html

 

I AM CONCIDERING THE MODERN DRIVELINE SETUP . I SPOKE WITH SOMEONE THERE ALSO. WHAT I WANTED TO KNOW FROM THEIR TECH GUY WAS IF THE 67-68 AND THE 69-70 KIT ARE THE SAME EXCEPT FOR THE BRACKET THAT ATTACHES TO THE PEDAL . HE COULDN'T TELL ME, BUT JUDGING FROM PHOTOS I'LL BET THAT IS THE ONLY DIFF. I HAVE A 68 PEDAL I HAVE ALREADY PUT INTO PLACE AND IT LOOKS LIKE IT WILL WORK SINCE I DON'T NEED THE RETURN SPRING. SOMEONE ON EBAY HAS SOLD A FEW SETUPS WITH THE 68 PEDALS IN THE 69 CARRIER AND SAYS IT WORKS FINE. I'M GUESSING IF I GOT THE 67-68 KIT IT WOULD WORK . I REALLY DON'T WANT TO SPEND AT LEAST $200 FOR THE 69 PEDAL.