Wheel spacers

[bswor 76]

Question, does anyone know where to get half an inch wheel spacers/adapters? It looks like this is all i will need to clear the caliper when installing the mustang steve cobra kit. All i can seem to find is 1" spacers/adapters.

[JC69Stang 0]

I found these....on ebay Item number 8020496900

 

It notes that you get 3/4" after install even though they are 3/8" thick.

 

That was the best I could find so far...

[DarkBuddha 107]

I think you'll have a tough time finding proper 1/2" adapters. That said, as long as your wheel studs are long enough, you should be able to get away with just using spacers. I'm ordering my adapters from this guy... he had these as well:

 

http://cgi.ebay.com/ebaymotors/Wheel-Spacers-5-Lug-1-2-Thick-108-127mm-2Pc_W0QQcmdZViewItemQQcategoryZ42614QQitemZ8021998263

[bswor 76]

i ordered the 3/8th" spacers they should work out fine.

[70vert 17]

when I lowered my car on the coilovers, the wheel mysteriously started to rub my UCA again. I'm once again spacer shopping and/or hoping when I go with the Baers that they push it out just enough (1/8" supposedly) to give me the clearance. Yeah, I'm going with new wheel studs too.

 

i ordered the 3/8th" spacers they should work out fine.