wfridolfson

thanks for the help

looking for site that has wiring diagrams for 69 fastback, thanks for any help

thanks for the info, going to try now

kustom color c-1 clear from tcp global

am painting my 69 fast back, have painted fenders and all parts that could be removed, clear on everything but trunk lid looks great, can i rough up and put a couple more coats of clear on it

thanks for all the help, hood is now properly aligned, seemed backwards but worked out great

thanks, i'll give it a try and let you know how it goes

same springs, i wish i would have drilled a couple of pin holes to get it back to the same place

it won't go down even with the fender like it was before i took them off

trying to put hood back on and adjusted after getting hinges powder coated but can't get the right side of hood down, any suggestions?

hello everyone, i bought an assembly manual from NPD for panel assy, it shows the dash, doors and windows but nothing on rear seat for a non fold down rear seat or sail panels, was wondering if anyone had diagrams of these

i'll check the fuses, does anyone know whereto find wiring diagrams for dash, there are about 4 cut wires and i want to find out were they go

have a question on dash lights, if 1 bulb is blown do all lights not work? checked them and 1 is blown and none work, took dash out cleaned all connections but nothing

I,ll give it a try, could be that or trash from old tank and line, had clear glass filter in line but you never know if something got through, have already replaced line and tank, thanks for the help

set timing at 8, i have an aftermarket HEI dist in it

how do you check idle passages, this thing has me so pissed i can't see straight, why do we love these cars

itwas running but with 2Vheads and intake, swithched all at the same time

checked that everything is hooked up or plugged off

have a 351C, just put in new cam, lifters, timing chain, has the 4V closed chamber heads, torker intake with barry grant speed demon carb. Broke the cam in at 2000 rpm for 20min like comp says, my trouble is that it will not idle, will run if you keep at or above 1500 rpm, but try and let it idle and shuts off, only time it did idle was after cam break in and was able to set timing,i'm thinking its with the carb, it is electric choke and when cold will idle up been when gets warm shut down, any ideas

this is my girlfriends 07, love the color and wheels, i want to get the boss stripes but want boss 351 since its got a 351C in it

its coming along, only been able to work on it on weekends and when its been nice out, now that the time has changed and getting warmer i'm hoping to get it done faster, my girlfriend has a 07 grabber orange mustang and i'm thinking of going that way and making it a boss clone

just wanted to post some pics of my 69 sportsroof, long way to go but getting there

it turns over but very slowly, tried moving distributor little at a time but still the same until it cools down, then turns over normally

just put in new cam, lifters, timing chain in 351C, broke cam in to spec from comp cams, trouble i'm having is engine wont start when motor is hot, i'm 90% sure it's starter, cables are good and everything is tight, starter turns over great when cold just wanting to know i'm on right track and looking for ideas on new starter

replacing timing chain with a comp cams double roller type, will i have trouble with oil slinger clearance, going in a 351C