Psychbiker
-
Content Count
10 -
Joined
-
Last visited
Posts posted by Psychbiker
-
-
I have two of these.
1) Brand New and the newer model that is clockable. Comes in Powermaster box just like the factory. $200
2) Older model that was completely rebuilt by Powermaster. It just spin and not pop out. Turns out I wasnt running a bigger enough gauge positive cable. $150
Shipping will be $17
I'm in Northern Bay Area California if you are local.
-
So I have to remove the headers just to remove the steering box too??
Thats not gonna fly having to remove the headers. Of course I got the Edelbrock heads and have 4 FREAKING bolts per tube....yeah 32 headers bolts. Had to file down a 3/8 wrench to get to some of them and jack the engine up on either side.
Would a Rack system be easier to install?
-
I have hooker super comp headers in my 69 Mach1. The steering box needs replacing/rebuilding or something new.
Has anyone removed the steering box with the engine in and headers?
I want to add the Borgeson setup but not sure if there will be room in there.
Thanks
Rc
-
I have Two Powermaster Mini Starters.
#1 Was mock fitted but never plugged in an ran. Still in box. This is the newer model and allows for adjusting the plate a bit. $200
#2 Is a little older and was completely rebuilt by Powermaster. The gear seemed to not want to pop out at times. I thought it was heat soak....turns out I wasn't running a large enough gauge wire to power it :oops: $150
I'm located in the Bay Area/Nor Cal
Thanks
Rc
-
Thanks for the link.
Most people commented that theirs fit like a glove. I'm just curious on the room I have. I'll have to look down there again.
-
Need to fix my steering.
The box is original and pretty loose.
Looked into a Flamming River box or having mine rebuilt. Then I found the Borgeson and like the idea of eliminating pieces and cleaning up the setup.
Will I be able to install this with a 390 and Hooker Headers? Car is an automatic too.
Thanks
Rc
-
Great Starters
-
Long story but I have two Powermaster Mini Starters part #s 9506 for FE 390, 428.
#1 Brand New never hooked up. It was mock installed but thats it. This one is clockable and their newer model.
#2 Is a factory rebuilt by Powermaster. Everything on it is brand new and maybe 6 starts. This one is not clockable.
Post or PM with questions.
Thanks
Rc
-
How long ago was the box rebuilt? Is it a 16:1? Did you rebuild it?
Powermaster XS Torque Starters (2) FE 390-428
in Parts for Sale / Wanted
Posted · Report reply
up.