69gmachine 15 Report post Posted April 17, 2013 My car has been down due to a leak in the brake system. I believe it's fixed now, but I decided to add a lever arm to the hyd clutch like Modern Drive Line sells. If I didn't already have the hydraulic system functioning, I would have just bought their kit, but since all I needed was the lever arm and mount, I decided I could fabricate those myself easily enough. I spent about 6 hours total on the project spread over a couple of days. I moved the pivot back to where it was originally on the pedal. The difference in pedal effort is absolutely delightful! I would highly recommend the MDL kit if you're starting from scratch, and if you already have the master and slave (or hyd throwout bearing like I do) it's not that hard to fabricate your own lever arm. Quote Share this post Link to post Share on other sites