Ponyboy 10 Report post Posted June 16, 2008 When i bought my 69 someone had already changed the drivers side to 70 bolt in glass but the PS still had the glue in glass so i am going to switch it to bolt in , question is do i have to change the regulator or are they the same as the 69. If anyone has brackets they want to sell i am in the market for one Quote Share this post Link to post Share on other sites
mustangdan69 10 Report post Posted June 16, 2008 Hi i use'd my 69 regulators they look the same the 70 glass bolted right up. what brackets are you looking for i might have them. thanks dan Quote Share this post Link to post Share on other sites
Ponyboy 10 Report post Posted June 16, 2008 the brackets that hold the 70 bolt in glass, only need the passenger side Quote Share this post Link to post Share on other sites
Ponyboy 10 Report post Posted June 16, 2008 also need the glass if anyone has the passenger side they want to sell . also is the fastback door glass the same as the coupe Quote Share this post Link to post Share on other sites
Ponyboy 10 Report post Posted June 17, 2008 anyone Quote Share this post Link to post Share on other sites
ihateclowns 10 Report post Posted June 18, 2008 The regulators for a 69 are different than a 70. The 69 has a slight offset on one of the arms that attach to the window brackets. Also, the glass is different for a coupe and fastback. The two most notable things I have seen is that the rear angle of the glass is different as well as the height. I'm not the pro, but these are my observations. Clowns! :clown: Quote Share this post Link to post Share on other sites