69fastback393 0 Report post Posted January 2, 2007 just wondering has anyone seen a 03-04 mach 1 4v engine in the 69-70 using the 03-04 shaker scoop.thought it would be cool for my next project. Share this post Link to post Share on other sites
redmustangboy 10 Report post Posted January 2, 2007 Sounds nice. I am putting in the 4.6 DOHC in mine but I did not try to use mach 1 scoop. I am using the cobra intake and a blanked off boss 429 scoop. I am using a custom wiring harness from the detail Zone and a fuel cell through Reenmachine. I had to use the Rod & Custom front suspension package and drop my tranny mount to fit the AOD. How eo I hook up the automatic? The crank is the cast one from a continental the same as for an automatic Mach. Hope to be on the shows circuit around Indy this spring and summer. By the way this is not a cheap option. Nick Share this post Link to post Share on other sites
4MuscleMachines 1 Report post Posted January 3, 2007 I have a 70 shaker hood Boss and I took off the oem shaker and put in the 03/04 Mach shaker. They are pretty identical in size so your stock shaker hood will work with it. You can also cut a hole in a standard hood using shaker hole templates found on eBay and elsewhere. Share this post Link to post Share on other sites
69fastback393 0 Report post Posted January 3, 2007 i guess my biggest question would be the shaker position on the 4.6 vs the hood of a 69.it just looks likes the shaker on the new mach sits alot more forward and also higher.does anyone have pics of this swap? Share this post Link to post Share on other sites