rawlinss
-
Content Count
173 -
Joined
-
Last visited
Posts posted by rawlinss
-
-
I know what you mean about wedging yourself in b/w the seat and steering wheel. I just bought a smaller steering wheel....
-
Here is our quick video of the start up and lights.:biggrin: WOW Love this video!! Your car looks better than any new Mustang out there. Anyone would be proud to own it!!
-
nice solid car. congrats!!
-
I always make it a point to tell the 30's and 40's Ford owners that I appreciate they used Ford Motors. I too think it is wrong to run a ford with a chevy engine....
-
this plug runs the windshield wiper motor on my 69 Mustang. I do not have intermittent wipers.
http://www.1969stang.com/mustang/forum/attachment.php?attachmentid=14694&d=1375569093
-
Motor is freshly rebuilt. Will be replacing PCV valve this week. Have a cheap one on there now and since they don't cost much anyway seems like the best place to start.
Came from a car show too that I won Best Ford. Some Haters may have pulled the dip stick out. 1st time we have had anything like this happen. Has been running like a charm....
-
Anyone ever had oil blow dipstick up and blow oil out?? This happened on the way home today...
-
Got to reading in a book and hubby thinks he installed it upside down...
Will keep you posted.
-
Bought the Kit from CJ Pony...
http://www.cjponyparts.com/fuel-tank-with-drain-plug-kit-1969/p/FTK2/
-
yes, reads full when it has 20 gallons. Leaning towards bend the float arm down. Will try this...
Thanks
-
Have a new 20 gallon gas tank and sending unit in my 69 coupe.
Gauge reads Empty when tank is only half full...
Any Ideas how to fix this problem??
Thanks,
Sandie
-
sweeet!
-
Welcome to the site! Great Project you have there...
-
Very nice job. Looking Great!
-
:thumbup1:
-
Do not forget cup holders....
-
13" works great...
used the original horn button with it...
(**note** Looks like horn button was not snapped on yet in this pic)
-
sweet Pic
-
-
woo hoo. What a Gem!! Someone was very lucky to buy this one....
-
We did away with our vinyl top. If you are keeping the top they won't fit. Got the non vinyl drip rails from CJ Pony. They are alot thinner metal than the originals, so you have to be really careful with them, because they will bend easy.
If you are not putting vinyl back on this will work. Be careful not to put too much paint on drip rail edge. Had to remove some of the paint so ours would work.
-
do not need. got the new pair to work. no vinyl type...
-
Got non vinyl new pair to work since vinyl was removed. Had to work on them a little because of so many layers of paint, but finally went over rail and installed.
Please delete. Do not need now.
Thank you
-
Coming along nicely!! Can not wait to see it painted!
new 69 owner
in The Garage
Posted · Report reply
Nice car. Welcome to the sight....