RobotMan 264 Report post Posted September 3, 2020 Has anyone had an issue with brake pedal not wanting to return when pressed hard to stop? I have power brakes with disc brakes on front and drums on back. Any help would be appreciated. Thanks Rick Quote Share this post Link to post Share on other sites
dream car 12 Report post Posted September 4, 2020 Either you have a leaking brake cylinder, or a malfunction master cylinder ( the plunger seals inside the master cylinder is damaged) Quote Share this post Link to post Share on other sites
Brian Conway 264 Report post Posted September 4, 2020 Nope not had any problem with the brake pedal returning in my stock power disc/drum brakes. As mentioned the master cylinder may require some attention. The spring responsible for returning the piston and pedal rod is in the MC. Checked the brake fluid level ? Is this a stock system with original parts ? Quote Share this post Link to post Share on other sites
RobotMan 264 Report post Posted September 4, 2020 8 hours ago, Brian Conway said: Nope not had any problem with the brake pedal returning in my stock power disc/drum brakes. As mentioned the master cylinder may require some attention. The spring responsible for returning the piston and pedal rod is in the MC. Checked the brake fluid level ? Is this a stock system with original parts ? No everything is new. Quote Share this post Link to post Share on other sites
Midlife 814 Report post Posted September 4, 2020 Could it be possible that the bushings for the brake pedal assembly are bad? Quote Share this post Link to post Share on other sites
