70769 18 Report post Posted July 13, 2020 Greetings all! i hope you all may be able to help me out. I’m soooo close to getting my mustang back on the road and I’m at the last bits. So I have a ‘94 roller set up and due to machining the valve train geometry is no longer stock. My question is what should I set my preload to past 0 lash on the heel of the cam? Is there a number of turns I should be? Right now with 6.143” rods I have 2-3 full turns which seems a bit much. Thoughts? Quote Share this post Link to post Share on other sites
LoneWolf2U 136 Report post Posted July 13, 2020 Hyd lifter start with a one turn past 0 clearance of pushrod. 1 70769 reacted to this Quote Share this post Link to post Share on other sites
70769 18 Report post Posted July 13, 2020 Perfect! Shims are needed then it seems... many thanks good sir! Quote Share this post Link to post Share on other sites
