Kris 90 Report post Posted July 4, 2020 Does anyone have an easy way to install the ignition switch bezel without having to buy the stupid tool. I really don’t want to have to pay for the tool plus shipping to use it one time. Quote Share this post Link to post Share on other sites
aslanefe 333 Report post Posted July 4, 2020 2 hours ago, Kris said: Does anyone have an easy way to install the ignition switch bezel without having to buy the stupid tool. I really don’t want to have to pay for the tool plus shipping to use it one time. I made one with two tabs from sheet steel. Cut a piece of thick sheet to fit in 2 opposite slots Quote Share this post Link to post Share on other sites
69NC 21 Report post Posted July 4, 2020 I used two small screw drivers and a needle nose vice grip to remove and install it. Quote Share this post Link to post Share on other sites
Kris 90 Report post Posted July 4, 2020 Got it in there. I cut a piece of steel and ground the edge so it would fit. Then I wrapped it in tape so it would scratch anything. Worked great. Thanks Quote Share this post Link to post Share on other sites
