Body Buck Plate

[ralt962 11]

Does anyone have a location for the body buck plate that goes on the Right had side, top of the shot gun?  It has one philips screw holding it down.    It has the VIN and the various option and paint codes.  I have new shot guns on the car so there  the original hole isn't there.  

thanks,

[Casgar 21]

Around here.

 

[aslanefe 346]

Picture of buck tag on my 69 Mustang Grande.

Buck tag  on my 70 T5 Grande (European export) is located like Casgar's picture, it also has an other tag that has VIN, Koln Germany weight etc on it.

[Mike65 502]

On my 69 Coupe that was built in Metuchen, NJ 11/68 it is attached to the top of the r/s rear inner fender apron back by the hood hinge.

[Ridge Runner 1,153]

I have seen them in both locations ,top of inner rear fender apron and front of radiator support . California 69s do not have them 

[69RavenConv 302]

7 hours ago, Ridge Runner said:

I have seen them in both locations ,top of inner rear fender apron and front of radiator support . California 69s do not have them 

+1

Dearborn - radiator support

Metuchen - inner fender

San Jose - none.

[ralt962 11]

On 6/29/2020 at 5:17 PM, Mike65 said:

On my 69 Coupe that was built in Metuchen, NJ 11/68 it is attached to the top of the r/s rear inner fender apron back by the hood hinge.

Mine was built in January of 69.  I believe thats where mine was originally.  Sound like there were not all that accurate in the installation.  

I'll drill a hole back there.  Looks like Casgar had the small hole about in a good spot.  

 

thanks for the quick responses.