Kris 90 Report post Posted June 25, 2020 I seem to have lost the hardware to attach the accelerator pedal assembly to the firewall. Does anyone have a picture that shows if it’s bolt and nuts or screws? I looked in my assembly manual and it looks like bolts with no nuts. Searched everyone online and can’t find where anyone list it to see what it looks like. Thanks Quote Share this post Link to post Share on other sites
RPM 1,272 Report post Posted June 25, 2020 ~.210" o.d. on the threads. Same screw as the cable. Quote Share this post Link to post Share on other sites
Kris 90 Report post Posted June 25, 2020 Exactly what I needed. Thanks 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,272 Report post Posted June 26, 2020 You are quite welcome. Quote Share this post Link to post Share on other sites
jusatad 10 Report post Posted July 19, 2020 This helps me as well. In my case, the body shop got carried away filling extra holes in the firewall. Can I get a pic of the entire gas pedal? I'm trying to figure out where to drill the holes to mount the gas pedal. Think I have the general area. Also wondering what the 2 holes above the gas are for? Quote Share this post Link to post Share on other sites
Grabber70Mach 110 Report post Posted July 23, 2020 On 7/19/2020 at 1:09 PM, jusatad said: This helps me as well. In my case, the body shop got carried away filling extra holes in the firewall. Can I get a pic of the entire gas pedal? I'm trying to figure out where to drill the holes to mount the gas pedal. Think I have the general area. Also wondering what the 2 holes above the gas are for? This might help you. 2 Mach1 Driver and capemustang reacted to this Quote Share this post Link to post Share on other sites
Brian Conway 279 Report post Posted July 23, 2020 What year and model are these hole locations from ? Quote Share this post Link to post Share on other sites
jmlay 92 Report post Posted July 23, 2020 The lower to pictures are 1970 Mustang. Throttle cable square hole is the giveaway. Quote Share this post Link to post Share on other sites
Brian Conway 279 Report post Posted July 23, 2020 No Disto-Vac stuff on my 69 and I don't see a hole for the ground screw for the block Quote Share this post Link to post Share on other sites
Grabber70Mach 110 Report post Posted July 23, 2020 70 is what the pictures are from. I got them a couple years back from a gentleman on this forum or the VMF. Quote Share this post Link to post Share on other sites
aslanefe 352 Report post Posted July 23, 2020 11 hours ago, Brian Conway said: No Disto-Vac stuff on my 69 and I don't see a hole for the ground screw for the block I believe, Distro-Vac stuff and Vac tree are for AC cars only. Quote Share this post Link to post Share on other sites
Mach1 Driver 614 Report post Posted July 23, 2020 7 hours ago, aslanefe said: I believe, Distro-Vac stuff and Vac tree are for AC cars only. Isn't that for cruise control? Don't know, but mine has AC and no Distro-Vac or cruise. Quote Share this post Link to post Share on other sites
jusatad 10 Report post Posted July 24, 2020 @Grabber70Mach Thank you. The pics are very helpful. I'm sure my 69 doesn't have Distro vac. Your pic doesn't have the 2 holes above the gas pedal, still don't know what they're for. Quote Share this post Link to post Share on other sites
aslanefe 352 Report post Posted July 24, 2020 6 hours ago, Mach1 Driver said: Isn't that for cruise control? Don't know, but mine has AC and no Distro-Vac or cruise. I was talking about the hole marked as Distro-Vac on the pictures Grabber posted. On my cars the AC controls get the vaccum from one hose from the vaccum tank and vacuum is applied to heater hose valve through the other hose on that hole (you can see the hoses on one of the pictures above). As far as I remember, my 70 Cougar with AC has that hole and Vac tree. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
