RPM 1,242 Report post Posted June 24, 2020 Anybody have a hot tip on which ones to use? Any input on the NPD stripes? Quote Share this post Link to post Share on other sites
RPM 1,242 Report post Posted June 25, 2020 Not one of ya? Quote Share this post Link to post Share on other sites
Brian Conway 272 Report post Posted June 25, 2020 Sorry no buying experience or recommendations. Still running with the originals. Please excuse the slight discoloration at the rear wheel. I'm sure you understand. Brian 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted June 25, 2020 I’ve seen red Mach’s with both gold/w and black/g Guess would be what’s suits your liking. I got mine from CJ’s. Right rear had a flaw in reflective composite and they sent me a free replacement for that piece Quote Share this post Link to post Share on other sites
RPM 1,242 Report post Posted June 25, 2020 1 hour ago, Caseyrhe said: I’ve seen red Mach’s with both gold/w and black/g Guess would be what’s suits your liking. I got mine from CJ’s. Right rear had a flaw in reflective composite and they sent me a free replacement for that piece Black huh? Well screw you, now you've got me thinking, which ain't good. Black kinda goes with the hood. Crap... I'm not a fan of CJ's. Got NPD down the road a piece. Looks real good for 51 years old Brian. I wouldn't mention it again. Thanks guys. Quote Share this post Link to post Share on other sites
Mach1 Driver 596 Report post Posted June 25, 2020 I'll be doing Graphic Express. I don't like reflective stripes so will do customs in their gloss black #12 non-reflective. They also have matte black, but it has a warning not to wax. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 25, 2020 Black stripes do matter LOL. I've used Graphic Express on most of our stripes. 2 RPM and Caseyrhe reacted to this Quote Share this post Link to post Share on other sites
Brian Conway 272 Report post Posted June 25, 2020 Might give this guy a call ? 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,242 Report post Posted June 25, 2020 Black it is. Now to finger out the seller. Thanks guys, I think :) Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted June 26, 2020 5 hours ago, RPM said: Black it is. Now to finger out the seller. Thanks guys, I think :) This finger? 2 RPM and mustangstofear reacted to this Quote Share this post Link to post Share on other sites
bigmal 229 Report post Posted June 28, 2020 On 6/25/2020 at 11:40 PM, mustangstofear said: Black stripes do matter LOL. I've used Graphic Express on most of our stripes. Probably not new, but it appeals to me. Quote Share this post Link to post Share on other sites
mustangstofear 608 Report post Posted June 28, 2020 That could be race it LOL 1 bigmal reacted to this Quote Share this post Link to post Share on other sites
Midlife 838 Report post Posted June 29, 2020 1 hour ago, mustangstofear said: That could be race it LOL That's not punny. 2 bigmal and mustangstofear reacted to this Quote Share this post Link to post Share on other sites
Brian Conway 272 Report post Posted June 29, 2020 Now that's serious. Is that the 2nd gear scratch/wiggle out there in the distance ? 1 bigmal reacted to this Quote Share this post Link to post Share on other sites
ralt962 11 Report post Posted July 3, 2020 I have a candy apple red Mach 1. I used the NPD gold and black stripes. Went on easy and look great. Make sure you find the recommendations of where to install them. There are some good old articles on the location. Quote Share this post Link to post Share on other sites
Caseyrhe 650 Report post Posted July 3, 2020 Bob, I used the measurements I found off this site, made a few pencil marks, and ran a string line. I then came back with painters tape to match the string line. The lip of the tape is just enough to catch the stripe once backing is removed. It only takes just a little soap in the bottle to make the stripes workable. 1 Mach1 Driver reacted to this Quote Share this post Link to post Share on other sites
Shep69 149 Report post Posted July 3, 2020 I used Graphics Express and couldn’t be happier . I did purchase some on eBay and they were complete rubbish the first time. 1 RPM reacted to this Quote Share this post Link to post Share on other sites
Mach1 Driver 596 Report post Posted July 3, 2020 2 hours ago, Shep69 said: I used Graphics Express and couldn’t be happier . I did purchase some on eBay and they were complete rubbish the first time. Dang that looks good!! 1 RPM reacted to this Quote Share this post Link to post Share on other sites
RPM 1,242 Report post Posted July 3, 2020 1 hour ago, Mach1 Driver said: Dang that looks good!! Outstanding job Shep! 1 Shep69 reacted to this Quote Share this post Link to post Share on other sites
RPM 1,242 Report post Posted July 3, 2020 4 hours ago, Caseyrhe said: Bob, I used the measurements I found off this site, made a few pencil marks, and ran a string line. I then came back with painters tape to match the string line. The lip of the tape is just enough to catch the stripe once backing is removed. It only takes just a little soap in the bottle to make the stripes workable. Nice tip Casey, I was thinking of using a laser level. Tell ya what, next time I'm in Texas I'll drop by and you can show me your magic on my 69. 1 Caseyrhe reacted to this Quote Share this post Link to post Share on other sites
